Cycloidal pinwheel reducer is usually a up-dated of different type transmissing machine made with K-H-V less teeth engagement and the cycloidal pin steering wheel clenching mechanism, which are trusted in drive and lowering of textile and dying, foodstuff, mining and metallurgy, Oil and chemical cranes, conveyors, job machinery etc and Sector. various fields.
Features:
1. Gear is constructed of high strength low carbon alloy steel by carburizing and quenching. The hardness of tooth area can reach HRC58-62. CNC grinding technology is used for all good contact overall performance, with high precision and gears
2. high transmission proficiency: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable procedure and low noise;
4, compact structure, light weight, long service existence and high bearing capacity;
5. easy to assemble, check and disassemble.
Operation specifications and precautions
1.High modularization design: many equip with various engine or other power suggestions conveniently.Same machine type may equip with several power motor. It really is easy to realize the combination and
junction between every equipment type.
2.Transmission ratio: fine division, wide scope. The combined equipment type may form large transmission ratio, i.e. result suprisingly low rotary speed.
3.Form of installation: the positioning to be installed isn’t limited.
4.High strength, compact: the box body is made of huge strength cast iron. Gear and equipment shaft adapts the gas carbonization, quenching and great grinding process, which means bearing capacity of unitvolume is large.
5.Long life: Under the condition of appropriate type chosen (including choosing suited operation parameters)normal procedure and maintenance, the life span of main elements of speed reducer (except wearing parts) should not be significantly less than 20000 hours. The wearing parts include lubricating essential oil seal, essential oil and bearing.
6.Low noise: because main elements of speed reducer are processed, assembled and tested critically,which means noise of speed reducer is low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer
1. High acceleration ratio and efficiency
Single stage transmission may reach to 1 1:87 of speed-downwards ratio and the efficiency is certainly a lot more than 90%. If make use of multi-speed travel the speed-down ratio is normally bigger.
2. Compact
Being adapted epicyclic transmission principle, the input and productivity shaft are at same axis centre, it is compact.
3. Smooth and stable run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the device part is stable, the vibration and noise is limited anyway content.
1. Large deceleration ratio
A higher deceleration ratio of 1/30-1/320 can be acquired.The structure is simple, but it can recognize high reduction ratio gadget.
2. Small gear clearance
The Get, which meshes with ordinary gears and has minimal backlash, is essential to the controller business.
3. High precision
Multiple teeth are engaged at the same time, and there are two gears engaged with 180 degree symmetry. Subsequently, the affect of tooth pitch error and cumulative tooth pitch error on the rotation precision is relatively average, making the positioning precision and rotation precision reach a very high level.
4. Less parts, convenient installation
The three basic components achieve a high deceleration ratio, plus they are all on the same axis, therefore the kit is simple to install and easy to shape.
5. Small in proportions and light in weight
Compared with the prior gear device, the quantity is 1/3, the fat is 1/2, but can buy the same torque capacity and reduction ratio, reaching small lightweight.
6 High torque capacity
Flexible wheel materials USES special steel with huge fatigue strength.Not the same as ordinary transmission product, the number of teeth meshing makes up about in regards to 30% of the total amount of teeth. In addition, it is in contact with the surface, in order that the pressure borne by each equipment is reduced and high torque capability can be obtained.
7 High efficiency
The sliding of gear meshing parts is quite small, which reduces the energy loss due to friction. Therefore, high lowering ratio can be achieved while maintaining high effectiveness, and miniaturization of traveling motor can be realized.
8. Low noise
The apparatus meshing cycle speed is low, the transmission movements force balance, which means operation is quiet, and the vibration is quite small.
◆Huge speed ratio and great efficiency single-stage transmission can achieve a deceleration ratio of 1 1:87, and the efficiency is a lot more than 90%. If multi-stage transmission is used, the deceleration ratio will become larger.
◆Because planetary transmission theory is adopted, the suggestions shaft and outcome shaft are on a single axis line, so that the machine unit can get the smallest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is greater, and the mechanism of balancing machine parts makes the vibration and voice limited by a minimum.
◆Reliable use and lengthy service life as the main parts are made from great carbon chromium steel, huge strength is certainly obtained by quenching (HRC58-62), and rolling friction is utilized in some transmission contacts, so the service life is long.
Cycloid reducer is usually a cycloid needle teeth meshing planetary transmission principle drive models, is an excellent transmission has various advantages, versatile, and will be both negative and positive operation.
•Big ratio, and high efficiency Smooth operation,
• low noise The make use of reliable,
• long life can reach 50000 hours
• Main parts high-carbon the Ming-steel after quenching treatment (HRC58-62),
• operation and contact with 
rolling friction, basically no wear, durable.
• Compact structure,
• little size Because the usage of a planetary transmitting, the insight shaft and the result shaft on the same axis, which makes the model to obtain the smallest possible size.
• Reasonable design, easy maintenance, and break down easily install,
• minimal number of parts and also simple lubrication, cycloid reducer trusted by an individual.
(1)Size above PL/PF120(including)high torque products adopt essential double wall planet pinion precision, improve the output strength and carrier.
(2).Hoop clamp coupling have five connection techniques ideal for different application environments.
(3).Size above PL/PF120(including)precision and high strength integral inner gear housing, processed in one station,which eradicate the cumulative error and assembling mistake of split type.Remove casting process;adopt scorching of forging process, that will reduce the blank material defects.
(4).The meshing gear adopt shaving method after carburizing and quenching,which better to make gear area smooth and high precision,reduce the temperature rising due to gear area gluing and friction.
This series worm-gear reducer was engineered after RV worm microreducer, that have a complete norm, wide speed for selection, and many mounting positions. Its effectiveness and mounting dime nsions conform the same sorts of foreign.
The mixture of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square beautiful shape, shape, radiate heat efficiently, compact structure and low noise.
Very good sealing and adaptability.Its combination with T gear reducer and MB/MBN variator may meet all sorts of speed requirement.