Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, removed from unused 18” or 24” China Air flow Compressor electric fan motor china diameter TPI fans. Made to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor comes with a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring between your electric electric motor, capacitor and quickness control change is still hooked up however the cord itself is generally detached as seen in the photos. (Find “Control Notice” below for modify type.)
T (See “Software Notice” below for utilize in various other applications.)
Dimensions: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft is½” (0.500″) diameter x 2 ½” lengthy with a collection screw simple. There are (4) threaded mounting lugs on leading of the motor, ½” long x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and also to be on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to another).
Rate: The approximate engine speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of 
rotation (facing the shaft end of the electrical motor) is Clockwise.
Control Take note: Motors will come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH variations in the images). Both of these types of switches both control the engine in the same way (but you have a rotating knob and you have got a pull-chain). If you order several engine at the same time, we will do our best to supply your purchase with each one kind of control or the additional.
Application Note: Do NOT use this electric engine in a nonfan app. This is a totally enclosed fan electric electric motor and made to have continuous ventilation over the motor casing for cooling. The casing isn’t vented and the electrical motor will overheat and get into automatic thermal overload if run in a nonfan system where there isn’t solid ventilation past the motor. (Caution Note: the electric motor will restart instantly when it cools cool off.) Using this electric motor for applications aside from 18 & 24″ TPI fans could also overload the engine and cause it to proceed into automatic thermal overload. (Your companion blade from another producer may have a steeper blade angle.)
Origin: This electric motor is manufactured in China.