• Engine gearboxes are maintenance-free, compact power resources for driving vent, display, home and flap ventilation systems in greenhouses.
• Single phase and 3 phase choices for your individual needs.
• Key feature of the drives certainly are a self-braking worm equipment transmission and an integral linear limit switch device.
shaft-mounted gear motors are finish electromechanical drives in which the speed of the installed electrical motor is decreased to the 
required value using two to 4 reduction stages. The drives are high performance and durable and feature a compact and lightweight design.
The compact design is manufactured possible through the mixture of a spur/worm gear drive with motors optimized for performance. motors also include a 60 to 70 percent weight reduction compared to commercially available drive motors. That is attained through the consistent application of light weight aluminum die casting technology, which guarantees a high amount of rigidity for the gear and motor housing concurrently.
Each drive is produced and tested particularly for every order and customer. A sophisticated modular system permits an excellent diversity of types and a maximum degree of customization to client Greenhouse Gear Motor requirements.
Because of their integrated control models, the shaft-mounted equipment motors will be the ideal drives for applications in reversing mode. In both rotation directions, described end positions are shielded by two position limit switches. This uncomplicated alternative does not only simplify the cabling, but also can help you configure the finish positions quickly and easily. The high shut-off precision of the limit switches guarantees safe operation moving forwards and backwards.
This gearmotor integrates a gearbox, an electric motor, and limit switches. It is connected with a metal shaft to turn the pinions for greenhouse ventilation. With the support of electric panel, it could run and then stop after set amount of turns. Then it can open and close the home windows for greenhouse ventilation to right positions.
To keep up the delicate environment inside a greenhouse, climate control systems certainly are a necessity. Several mechanical systems can be used in this respect; however cup vent drive systems have a tendency to be the most famous. The drive system consists of a central gearmotor connected to a 40:1 right angle reducer with dual output shafts. These OP shafts hook up to lengthy jack shafts that spread across the roof line of the greenhouse linking to multiple rack and pinion mechanisms that open and close large glass windows panes in the ceiling for temperature control.
Based on the size of the application form (length of the shafting, volume and weight of the window panes) we provides two gearmotor solutions from a modified edition of their 200 series parallel shaft collection – 1/5 HP and 1/20 HP. The application Is generally intermittent used; however the motors are rated continuous because the glass pane home windows could potentially be under continuous, subtle adjustment throughout the day.
Gear Motor, also known as Engine Gearboxes, is a particular kind of electrical motor that is designed to generate high torque while maintaining a minimal horsepower, or low velocity, motor output. Equipment motors can be found in many different applications, especially for the greenhouse, livestock and agricultural market, our motors can be found options to operate roof vents, wall structure vents,roof shading and screening, they put on the shaft with chain couplings that compensate for alignment mistakes and can be quickly taken out without disturbing the entire shaft.
shaft-mounted gear motors are finish electromechanical drives where the speed of the installed electric motor is decreased to the desired value using two to four reduction stages. The drives are powerful and durable and show a concise and lightweight design.