Greenhouse gear reducer

The EP Greenhouse gear driver is a compact and lightweight reduction gear driver with a limit switch system that is suitable for assembly of a locally available electric engine. The gearbox is used in manually-controlled or climate-controlled ventilation and display screen systems in greenhouses. The quick and easy-to-install EP gear motor is rainproof and windproof. The gearbox has a high protection class (IP65) and can be used within an ambient temperature of 0-60 °C.

The low-noise gearbox for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel tranny ensures that the drive shaft can be locked when the decrease gearbox isn’t running. The completely sealed reduction gearbox has an expansion chamber with a diaphragm to keep carefully the gear essential oil at a minimal pressure under all circumstances, even at high temps. Thanks to the usage of an expansion chamber, the geared motor can be installed in any placement. There are no limitations, because there is no need for a bleed connect. The sealed reduction gear reducer keeps the gear oil of the gear driver in optimal condition for its entire operating lifetime. The gear motor is ideal for discontinuous use, working class s3-30%, with a maximum activation time of 25 minutes.

The Gear box reduction gearbox has an FT85 motor assembly flange, to which a suitable IEC standard motor can simply be installed (EN 50347).

The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit switch system is installed within an built-in chamber and can be enclosed by an impact-resistant plastic-type cover. The limit change system is obtainable and simple to adjust. The limit switch system’s optimum switching range is 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The gearbox comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The reducer for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.

Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of software of 4-pole electric motor.
Protection class IP65.
May be used in ambient temps of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, maximum activation time 25 mins.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC standard motor (EN 50347).
Maximum switching selection of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).

Tags:

Recent Posts