Single and dual reduction planetary equipment drives to be used with electric, hydraulic, surroundings motors or Plastic Gear Rack mechanical power input from high acceleration, low torque sources to provide decreased speeds at increased torques. The input aspect has standard SAE pads for motor mounting. Available in the three result configurations shown below. Many units can be furnished with an intrinsic parking brake.
Solitary reduction drives are limited by 3500 RPM input; double reduction drives to 5000 RPM. Units with essential parking input velocity is limited to 2500 RPM.The same torque comes in either direction of rotation. Torque ratings are intermittent. For constant operation reduce torque rankings to about 1/3 to 1/2 the values shown. Devices provide 95% power tranny efficiency.
Input side has standard SAE pads and splined input. Output part has hub for mounting automobile wheel. Free wheel is possible by using the springtime disconnect to disengage the drive shaft. The disengage feature is usually regular on all wheel drives.
Input side regular SAE pads with splined input. Output side choices include: Keyed circular, hexed, hollow, tapered or splined shaft.
Input side is standard SAE pads with splined insight. Output side has a flanged spindle for coupling to the load.
Ever-Power model 6 emerges with or without integral parking brakes. The “SW” Power Wheel provides extra-huge tapered roller bearings, a ductile iron hub and warmth treated ring equipment to reduce backlash growth caused by wear. The external bearing nut supplies the ultimate in shaft retention and shaft power. Output could be a spindle shaft or various sizes of essential pinion gears.