micro planetary gear motor

The micro plastic gearmotor’s output shaft is compatible with this 14 mm wheels. We do not have any brackets for this gearmotor, and it generally does not have any installation holes, but its small size makes it simple to fasten with tape or glue. On the other hand, since this gearmotor is certainly almost the same size as a 1/4″ fuse, it could be mounted using regular 1/4″ (6 mm) fuse clips.

Motor accessories

The next diagram shows the micro plastic gearmotor dimensions in mm. The planetary gearbox includes a D-shaped plastic result shaft, which is 2 mm in diameter with a section that is flattened by 0.5 mm. The “D” portion of the shaft can be 2.5 mm long. The electric motor steps 6 mm in diameter and 9 mm long, and the gearbox duration, labeled “L” in the diagram below, depends on the apparatus ratio. The 26:1 gearbox is definitely 7.1 mm long, as the 136:1 option actions 9.4 mm. The engine leads include their tips pre-stripped and extend Micro Planetary Gear Motor approximately 2 cm (0.8″) from the back of the motor.

Gearmotor dimensions

Since the gearmotor’s output shaft is nylon, there can be small variances in the diameter from unit to unit. These variations may cause press-suit attachments like our 14 mm wheel to match loosely in some instances. In the event that you experience a loose fit, you could attempt swapping wheels or using a small dab of glue to help contain the wheel on.

Tags:

Recent Posts