nema gearbox

Ever-Power Company , announces its right position NEMA gearbox designed to IP65 specs for use in clean down applications in packaging devices and comparable machinery. Rated backlash is definitely 30 arc-minutes with choices for 4 or 8 arc-minutes. The NEMA 34 flanged gearbox has 440C Stainless bearings with seals and Nitrile o-bands shaft seals on both insight and result. All fasteners are stainless. Hard anodized aluminium or 316 Stainless housings are available. Customizing for other than NEMA motors or your unique application is easily done.
This Nema 17 stepper motor with 39mm body and 1.68A rated current, integrated with a 41mm Planetary gearbox of 5:1 gear ratio. It’s a great choice to applications that with special space but require low velocity and/or high torque.
Electrical Specification
Manufacturer Part Quantity: 17HS15-1684S-HG5
Motor Type: Bipolar Stepper
Step Angle: 0.36 deg
Keeping Torque without Gearbox: 39Ncm(55oz.in)
Rated Current/phase: 1.68A
Phase Resistance: 1.6ohms
Voltage: 2.7V
Inductance: 3.2mH ± 20%(1KHz)
Gearbox Specifications
Gearbox Type: Planetary
Gear Ratio: 5 : 1
Efficiency: 95%
Backlash at No-load: <=15 arcmin
Max. Permissible Torque: 3.5Nm(495.6oz.in)
Moment Permissible Torque: 6Nm(849.7oz.in)
Max. Radial Load: 150N
Ambient Temperature: -10 – 90℃
Insulation Class: B
Noise: <=50 dB
Life: 20000 h
Physical Specifications
Body Size: 42 x 42mm
Motor Length: 39mm
Gearbox Length: 41mm
Shaft Diameter: Φ8mm
Shaft Length: 23.5mm
Key-way Length: 14mm
Number of Leads: 4
Lead Length: 320mm
Weight: 680g
Replaced by the 3325_0, a engine with the same NEMA size and same torque.
This NEMA-17 motor comes with an integrated Planetary gearbox with a 52/11 :1 ratio. It creates 16.2 Kg-cm of torque at 1.68 Amps.
When linked to a 1067 – EP, the 3317 has a maximum acceleration of a little over 900 RPM. At the output of the gearbox, the step angle is a little under 0.35°. When using the step position in calculations, you should derive the exact step angle by dividing 1.8° by the gearbox reduction ratio.
This specific revision of the 3317 is made by a different manufacturer, but should behave very similarly to the revision 0 version.
Brother Gearmotors NEMA C-Face Speed Reducers
The gears in these NEMA C-Face speed reducers are high strength, free of maintenance and can be mounted in any direction with their slip fit “O” ring design. Low to high decrease ratios, flange install or foot install types, right position or hollow shaft correct angle types available. Suit NEMA C-Encounter AC motors, brushless DC motors and brushed DC motors.
For 1/2 HP up to 3 HP Motors
NEMA C-Encounter, 140TC and 180TC input flanges
Inline Helical Gear Velocity Reducers
Right-Angle Hypoid Gear Speed Reducers
Product Lineup
Product Features
Allowable Torque
Downloads & Reference
NEMA C-Face Acceleration Reducers Lineup
Output Power
Gear Type
Input Power
Gear Ratios
Maximum Input Speed
NEMA 56C Speed Reducers
NEMA C-Face Speed Reducers
Parallel Shaft (Foot Attach)
1/2 HP
1 HP
2 HP
3 HP
5:1 ~ 200:1 3600 r/min
Parallel Shaft (Flange Install)
Right-Angle Hollow Shaft
5:1 ~ 240:1
Right-Angle Solid Shaft
5:1 ~ 240:1
*Torque and Quickness vary based on insight voltage and frequency, please review item specifications for details.
Longer Life
Compared to a spur equipment of approximately the same pitch diameter, Helical gears may transfer high loads in greater speeds. This is because of the gradual engagement of one’s teeth and smooth transfer of the load.
Helical Gears
Lightweight and Compact
Die cast aluminum equipment housings make these quickness reducers light in weight, allowing engineers to create more economical mounting provisions
Maintenance Free
High-quality synthetic grease can be used in all gearboxes. They are packed at the factory , nor need maintenance filling or level checks. This saves precious time at setup and eliminates concern for pricey oil disposal required by the EPA.
Mount in virtually any Direction
These gearboxes are sealed with machine “slip” suit “O” rings and dual lip spring shaft seals on both motor and insight shaft and output shaft driver. Thus, the gear motors can be mounted in any conceivable path without concern for the position of a breather plug.
NEMA Output Flange Planetary Gearboxes, Max. Ratio 1000:1
Spec

Gearing Arrangement:Planetary,Spur
Frame Size:42.6/60/90/115/145 mm
Ratio:3~1000:1
Nominal Output Torque:8~215 N.m
Nominal Input Speed:2500~4000 rpm
Max. Input Speed:5000~6000 rpm
Backlash:12~15 arcmin, three stages, 6~9 arcmin, single stage, 8~12 arcmin, two stages
Noise Level:60~67 dBA/1m
Enclosure:IP65
Lubrication:Synthetic Lubricant
Key Features

The Ever-Power EP Series gearboxes include a NEMA output flange with metric shaft, to provide exceptional torque ratings and capacity for many of present servo and stepper motion control applications. The gearboxes are drop-ins for some industry standards and available from single to three phases with ratios 3:1 up to 1000:1, the best backlash of < 6 arc-minutes. Adapters for all servo and stepper motors. Features:
5 frame sizes with NEMA 17, 23, 34, 42, 56 flange and metric shaft
Backlash only 6 arc-minutes
Ratios up to 1000:1
High radial and axial loading capacity
20,000 hours service life
Synthetic grease, free of maintenance
Reliable operating performance, affordable integration

Tags:

Recent Posts