planetary gear box

The Ever-Electric power is a battle-tested modular planetary gearbox system designed especially for use in the Robotics industry. Designers choose one of four productivity shafts, configure a single-stage planetary using one of six different reductions, or build a multi-stage gearbox using some of the several ratio combinations.
All of the Ever-Power gearboxes include mounting plates & components for typical Robotics Competition motors (550, 775 Series, 9015 size motors) — these plates are custom created for each motor to supply perfect piloting and large efficiency.
What very good is a versatile system if it’s not simple to take apart and re-configure? That’s why we introduced the Ever-Electrical power with assembly screws in the rear of the gearbox. This helps it be easy to change equipment ratios, encoders, motors, etc. without need to take apart your complete mechanism. Another characteristic of the Ever-Electric power that means it is easy to use is the detachable shaft coupler system. This system lets you adjust motors with no need to buy a particular pinion and press it on. In addition, the Ever-Ability uses the same pilot and bolt circle as the CIM, allowing you to run a Ever-Power everywhere a CIM electric motor mounts.
he Ever-Power has a selection of options for installation. Each gearbox has four 10-32 threaded holes on top and bottom level of its casing for easy aspect mounting. In addition, there are also holes on leading which allow face-mounting. Conveniently, these holes will be on a 2″ bolt circle; here is the same as the CIM motor – everywhere you can attach a CIM-style engine, you can mount a Ever-Power.
Other features include:
Six different planetary equipment stages can be utilised to develop up to 72 unique gear ratios, the most of any kind of COTS gearbox in FRC or perhaps FTC.
Adapts to a variety of FRC motors (Handbag, Mini CIM, RS-550, RS-775, 775pro, Redline, AM-9015, and CIM)
Adapts to a variety of FTC motors (AndyMark NeveRest, REV HD Hex Engine, Tetrix TorqueNADO)
ABEC-1/ISO 492 Class Usual Bearings, rated for 20,000+ RPM
AGMA-11 quality world and sun gears made from hardened 4140 steel
The Ever-Electric power v2 assembly is currently held as well as screws that install on the “back” (engine side) of the housing. This ensures that the gearbox could be disassembled to change gearsets without taking away the gearbox end result from the robot. Bosses have been put into the sides of the gearbox so when it is side-mounted you can “crank down” on the mounting screws without accidentally misaligning a ring-gear level. The v1 & v2 type and output blocks can’t be combined and matched – A v2 input block can be used with a v2 outcome block. Ring gears and gear kits are compatible between v1 & v2
The bottom Ever-Power kits now include an optional pilot ring that may allow users to pilot the Ever-Power on a 0.75″ hole, rather than counting on screw clearances to locate the gearbox. The plastic-type material motor mounting plates now pilot on the suggestions block.
Product Overview
Product Usage:
All Ever-Vitality gearboxes require grease for proper planetary gear box operation and long life. We recommend using our crimson tacky grease, am-2768. We also encourage that an individual powers the gearbox continually for 30 minutes without grease to permit the apparatus teeth to wear in. While we carry out design with short run circumstances at heart, this ‘run in’ period for smooth gearbox operation, is recommended. Once that is completed, thorough grease of the gear teeth periodically to ensure smooth operation.
Solitary speed planetary gearbox, with the same installation and output interface as a 2.5″ CIM motor. Each planet gear has its bearing to spin openly on the carrier plate pins. A 2.5″ CIM Motor may also be used as the motor input, but needs this pinion equipment ( am-0556) and a CIM Spacer (am-0555).
Motor Input:
9015 motor fits on this gearbox
550 motor fits upon this gearbox
2.5″ CIM Motor can be installed, with a bored-out sun gear and a spacer
Included Hardware:
Two – 8mm id ball bearings, (19mm od, 22mm od) supporting output shaft
One – Steel world and sun gears, 32 dp, 20 level p.a.
Five – Planet gears (12 tooth)
One – 15 tooth sunlight gear, with 0.125 inch bore
One – 40 tooth band gear
Performance Data:
(with the type being truly a 9015 Fisher-Price motor)
Input voltage: 12 volts
Stall Torque: 1.12 ft-lb.
Free speed: approximately 4,000 rpm
Assembly Tip:
Install the lightweight aluminum plate to the face of the motor Prior to pressing the pinion gear onto the engine shaft.
Material: body can be aluminum, shaft is 4140 steel
Mounting Holes: #10-32 tapped holes (2), in a 2″ bolt circle to attach at output shaft
Outside dimension: 2.5 in.
Ratio: 3.67:1
Shaft Size: 0.313 inch,with 2mm keyway
Weight: 0.63 lbs
Product Features
Stainless steel 416 special non-electrolysis nickle surface treatment
Integrated helical internal ring gear
Patented output sealing systems design
One piece planet carrier with end result shaft design
Plasma nitriding
True helical gear design
Advanced gearing technology crowns lead of each gear tooth
Deep groove ball bearing
Lubricated with Nyogel 792D (Smart Grease)
With optional advanced backlash of < 1 arc-min
Planetary Gearbox with Output Shaft
Ever-Power planetary gearboxes with productivity shaft are suited to a variety of drive solutions.
The output shaft is available in several variations, for example, because an output shaft with feather key for positive-fit and trustworthy power transmission. The feather essential is a common connecting element found in numerous drive parts and permits you to achieve an instant and secure interconnection between your planetary gearbox with productivity shaft and your application.
The planetary gearbox with smooth output shaft may be the ideal element for attaining a force-fit link with a coupling. This enables you to attain maximum torque transmission even while in reverse mode.
You can also connect the planetary gearbox with result shaft to your travel system with a toothed shaft. Utilizing a toothed end result shaft standardized to DIN 5480, it is extremely simple to correctly fit additional drive elements for instance a pinion with internal gearing.
The input flange of the planetary gearbox is individually adapted to the engine. The compact product of planetary gearbox with outcome shaft and servomotor heightens your flexibility.
Due to the rotating result shaft’s low inertia, planetary gearboxes with productivity shaft will be the ideal solution for most dynamic applications. The flexibility of planetary gearboxes with output shaft gives you maximum overall flexibility to pick the right item for your application.
If, despite the compactness of our planetary gearboxes, you need a straight shorter gearbox, you will look for a right angle planetary gearbox with end result shaft here.
Complete selection of modular design planetary gearboxes for commercial applications. It combines high performance with low priced and compact size, exceptional reliability, simple unit installation and reduced repair. Brevini’s professional planetary gearboxes come in a variety of sizes to make sure optimum length and silent operating in a variety of applications. These in-range or right-angle planetary gearboxes can be purchased in male and feminine shaft configurations. The man shaft option (splined or cylindrical) will be able to withstand strong radial or axial loads on the productivity shaft.
HomeProductsGearboxesAxial Gearboxg700-P planetary gearbox
g700-P planetary gearboxes
Accuracy in the application.
The g700 planetary gearbox is an excellent solution for powerful and cost-optimized applications.
Its high-level of reliability, long program life and excellent scalability make it an accurate solution for demanding equipment tasks.
For applications when a medium backlash is necessary
High input speed feasible: max. input speed 18,000 rpm
Wide transmission range: we=3 to 512 in 24 ratios
Wide torque range: 44.25 to 7081 lb-in (5 to 800 Nm) in five sizes
Lifetime lubrication for just about any mounting position
Can be combined with following motors:
With synchronous and asynchronous servo motors in the power range from 0.33 to 27 Hp (0.25 to 20.3 kW) 2212 to 17,9670 lb-in (250 to 20,300 Nm)
The Ever-Power Planetary Gearbox for Electrical power and Precision
vrs inlineFull electricity with the highest degrees of precision. The PlanetGear of Ever-Power has the necessary electrical power reserves designed for the most difficult vitality transmission requirements.
compact design
high level of efficiency
high torsional rigidity
low mass moment of inertia torque
high overload capacity
high dynamics
large transmission ratios
Ever-Power presents innovative, customised gearbox alternatives in a helical-toothed design. The design of the toothing is usually carried out employing KISSsoft and our very own design and calculation courses.
As well as the provision of tech support team and advice to your customers, we also take over the entire engineering procedure. By working closely together with our customers, we promise the development and creation of the optimum travel solution in each circumstance.


Recent Posts