Screw Air Compressor For Laser Cutting

XT LASER generally recommend that customers purchase screw type oil-free air compressor, power is 7.5KW. The very best pressure up to 9 kg (but also to attain a minimum of 8 kg). The exhaust volume greater than 0.6 each and every minute. If the client has bought the very best oil air flow compressor with two essential oil filter. So as to reduce some water and dirty.

The fiber laser beam cutting machine must meet up with the cutting requirements of Screw Air Compressor For Laser Cutting china varied components and complex shapes. But it does not really operate with out a clean, dry, steady compressed air. The compressed air partly produced up of high 100 % pure oxygen and high purity nitrogen to provide trimming gas to the cutting head. A part supplied to the cylinder of the clamping desk as a power source. And the last part is used to blow and dust the optical path program.

From the air discharged from the compressed air through the dryer in to the gas tank and gas control cabinet, through a sophisticated digesting system, a gas clean and dry, and finally into the three street, were used as cutting gas cylinder, power source and light road dust gas pressure to maintain the normal operation of laser cutting machine.


Recent Posts