EP 700 Series Stainless Steel Worm Gear Speed Reducers | Ever-Power Gear
The Original Stainless Reducer
The Ever-Power Gear 700 Series Worm Gear Rate Reducer is a foundation in food and beverage applications for decades. As a leader in worm gear technology, Ever-Power Equipment continues to improve product performance by developing innovative designs to meet up more stringent demands and anticipated tightening of federal regulations in the food and beverage industry.
Blending trusted 700 Series worm gearing with an innovative new exterior style, the stainless 700 series has been optimized to withstand the harshest washdown circumstances. The units feature reliable 700 Series worm gearing, a 316 stainless rounded casing with smooth uninterrupted areas made to prevent particle accumulation and pooling liquids, double lipped shaft seals, covers for all hardware and counter bored holes.
NSF Certified Logo
Sure, a stainless gearbox costs greater than a painted 1, but purchasing a more corrosion resistant gearbox saves cash and makes the most feeling over time. Unmatched product overall performance in extremely caustic washdown applications combined with first class customer service makes Ever-Power Gear your initial choice for swiftness reducers and gearmotors!
NSF International Certified
316 stainless steel housing, bearing carriers and flanges
303 stainless output shafts
Rounded housing eliminates practically all flat surfaces and prevents foreign matter accumulation or position fluid
Elimination of most exposed hardware promotes simple surfaces to optimize wash down effectiveness
Lubed forever with H1 rated food grade lubricant Klubersynth UH1 6-460
Flange style incorporates jack bolt holes to facilitate easy motor-reducer separation
5:1 – 100:1 Single Reduction
100:1 – 3600:1 – Double Reduction
Motor flange style incorporates an O-band to reduce ingress of particles or fluids
Polished matte complete maintains clean appearance throughout operation
Optional high pressure washdown seal available
Obtainable in hollow and solid result shaft
Stainless Steel, Heavy-duty Correct angle (SSHdR) series worm gearboxes are made with 304 stainless steel. All reducer areas are polished and curved to prevent organism growth on surfaces. SSHdR series Hollow Output Bore reducers are available in speed ratios which range from 5:1 to 60:1 with imperial center stainless steel worm reducers distances ranging from 1.75 to 3.25 inches. Also, our stainless steel gearboxes come pre-filled with EP food grade lubricant.
“EP” series Flange Insight – Hollow Bore Result series stainless steel right angle worm gear reducers are stocked as finished goods with hollow result bore sizes ranging from 1” to 2-3/16” with obtainable center distances which range from 1.75 to 3.25 inches. All motor input flanges are NEMA C-face quill style designs and each unit is sold pre-filled with EP food grade lubricant. Stainless Steel bushing kits are sold separately to permit for a lot more head shaft size configurations.
5:1 – 60:1 ratios
Center distances which range from 1.75 to 3.25 inches
304 stainless housing, covers and flanges
Smooth, polished areas and etched nameplate
Internal bladder functions as a breather and effectively dispels heat
Double-lipped VITON oil seals (at output)
15CrMo4 NEMA quill input with carburizing heat treatment
CuSn12Ni2 bronze alloy worm wheel with high efficiency gear tooth configuration
RoHS plastic covers supplied to fill up unused mounting slots
0-ring provided upon input flange to avoid moisture intrusion
Pre-loaded with Mobil CIBUS 460 H1 food grade lubricant
Interchangeability with major brands
Stainless Steel (SS Series)
Grove Gear Stainless Steel gear reducers offer excellent corrosion protection. They are rust proof and able to withstand the harshest conditions. The stainless steel housing, cover and external hardware offer an exceedingly long life.
Center distances from 1.33” through 3.250”.
6 sizes available with ratings to 17 HP.
Available in single and dual reduction.
Ratios from 5:1 to 3600:1.
316 stainless steel housing and covers to withstand extreme environments.
Factory-filled with high quality Mobil Glygoyle 460 polyalkalene glycol lubricant
Vent-free “sealed-for-life” design with Enviroseal technology.
EP double lip seals provide prolonged life through increased resistance to temperature, abrasion and chemicals.
O-ring on face of input flange provides a positive seal against moisture intrusion.
303 stainless steel output shaft.
Worms are cut, heat-treated, floor and polished to provide efficient, quiet operation.
All units are 100% operate and leak tested at the factory to insure that you receive the highest quality product.
Ultimate application versatility with all-angle installation provisions, the widest collection of accessory bases and flanges and the largest collection of stock reducer styles.
Mounting sizes are interchangeable with many industry standard reducers.
EP Stainless Steel
Right Angle / Heavy Washdown Duty Stainless Steel Speed Reducer
This STAINLESS reducer is made for Heavy Duty Washdown applications and is resistant to many forms of wear. This is exactly what you wish to use for serious environmental conditions.
STAINLESS STEEL WORM GEARBOX
Comply with HACCP and EHEDG regulations
It is becoming increasingly difficult to get your machine to meet the HACCP and EHEDG regulations, while your customers vulue this increasingly more. The stainless worm gearbox drive system Ever-Power enables you to stay cost effective but fulfill tcustomer demants.
The Ever-Power stainless steel worm gearbox types are designed to meet the guidelines. As a result, they are resistant to an intensive cleaning regime, is made of hygienic components and so are also dead areas, and horizontal surfaces as much as possible, avoided. Of course, the material of the products is stainless steel.
Output torques of 40Nm up to 160Nm.
Output shaft sizes of 18mm up to 25mm.
Input flanges 63B14a up to 90B5.
Reduction ratios of i=7,5 up to i=100.
Food grade oil, meals grade seals and hygienic design.
Material worm wheel: Cu bronze SN12 Ni2 (UNI7013-10), material hardened steel worm shaft and ground profile ZI (UNI4760).
Belastingscapacitieiten conformity: ISO.14521, DIN.3996, BS 721, AGMA 6034, ISO 6336, DIN 3990, DIN 743, ISO 281.
STAINLESS WORM GEAR SPEED REDUCERS
◦ Right angle worm gearbox
◦ Ratio 5:1 to 60:1
◦ Size 206 to 325 (2.06″ to 3.25″ between input and output shaft)
◦ Created for heavy-duty washdown
◦ Rust free housing, flange, and shafts are ideal for food industry
◦ Ideal for tough conditions and corrosive applications
◦ Internal bladder adjusts to temperature and pressure – No need for a surface breather
◦ Heat-treated steel worm shaft w/ floor thread
◦ Aluminium bronze (ALBC3) worm wheel
◦ Polished matte finish
◦ High quality double lip oil seals
◦ Input flange O-ring repels external moisture
◦ USDA H1 food quality lubricant : MOBIL SHC CIBUS 460
◦ Compatible with 56C, 145TC and 182/4TC Electric motor Inputs
◦ Twelve months limited warranty
Ever-Power STAINLESS S Series right-position worm reducer is ideal for harsh washdown conditions in food processing or other applications with high temperature/high pressure sprays. The S Series comes standard given synthetic oil for life time lubrication and is comprised of a stainless steel housing that is designed for security in washdown applications, also made for multiple mounting configurations.
Hygienic stainless BJ worm gearboxes
Ever-Power provides a self-produced stainless gearbox selection of high quality. The series was developed specifically for the food industry and various other industries where there are continually stringent requirements for the level of resistance of the materials and the easy-to-clean style.
The gearboxes are made from a smooth stainless gear housing, they are existence lubricated and will of course be supplied with oil approved for the food industry. Essential oil seals are standard manufactured from nitrile rubber.
To reduce the chance of bacterial growth, the look is characterised simply by smooth machined surfaces without unnecessary flanges, recesses and installation holes. Additionally it is possible to order the gearboxes with torque arm, side flange, totally free worm and plug-in shaft. Other changes are performed on ask for including such as for example stainless spindle gears.
In situations where you will want complete hygienic gear engine, we can provide the EP-gearboxes fitted with stainless AC or servo motor.
Resistant to cleaning with drinking water under pressure
The protection of the gearboxes is IP65, and for stainless motors it is IP66. This ensures that the products could be cleaned with water under great pressure from all directions. To achieve an overall protection of IP66 by assembly of gearboxes and electric motor, you must make use of a gasket of nitrile rubber for the joint. This implies that the gear motors are well suited for free mounting with out a traditional stainless safety cover in areas where hygiene requirements are highest. Hidden resources of pollution can thereby be avoided.
The gearboxes are as standard supplied with a center distance of 31, 42, 61 and 99 mm with gear ratios from 5:1 to 100:1 and with an output torque of up to 900 Nm.
Stainless steel worm gearbox
Maximum output torque
5:1 – 75:1
5.4:1 – 75:1
7:1 – 100:1
7:1 – 60:1
7:1 – 100:1
Item selection brochures available below:
Full Integral Horsepower Product Catalog
Worm Product Selection Table
S 45 Series – 0.25 – 1HP, 97 – 450in-lbs, 17.2 – 250RPM
S 50 Series – 0.25 – 2HP, 199 – 567in-lbs, 17.5 – 250 RPM
S 63 Series – 0.25 – 2HP, 209 – 1199in-lbs, 18.6 – 250RPM
S 85 Series – 0.5 – 5HP, 666 – 2353in-lbs, 18.2 – 250RPM
Additional flange and shaft inserts obtainable and may be requested during product selection. To order, please contact Bison at 1.800.ATBISON (282.4766) and ask to talk with an Automation Specialist. Online selection and purchasing coming soon!
Stainless Steel Solutions
Powerful, Clean Solutions with a Stainless Reputation.
Ever-Power Drive’s stainless steel precision movement gearboxes are made for sterile manufacturing conditions. The product’s smooth surface area and curved contour permits easy cleaning and bacteria-free surfaces, ideal for meals digesting and pharmaceutical applications. The product is designed and ranked to IP69k offering maximum security against contaminant ingress in addition to leak free operation.
Catalogued types of Ever-Power Gear’s well-known stainless steel 700 Series acceleration reducers are now available with standard 2-day delivery. Process improvements possess yielded the industry’s best standard business lead time for stainless steel worm gear reducers.
Ever-Power Gear’s SS700 Series, the initial “domed crown” stainless reducers, are designed for maximum corrosion resistance and superior efficiency in high-pressure food digesting and packaging washdown applications.
A convenient after hours/holiday hotline can be available for emergency orders. Catalogued SS700 Series versions are stocked at local and regional distribution centers to ensure fast delivery.
All SS700 models are NSF Authorized and also have many maintenance-friendly features including electropolished exterior complete, sealed engine flange, and covered hardware. To avoid miniscule niches that can web host microbial contamination, the nameplate provides been laser marked to supply a smooth uninterrupted surface. A large internal oil reservoir, filled up with H1 food-quality lubricant (Klubersynth UH 1 6-460) and sealed for life, allows for a wide range of operating temperatures and extended service existence.
stainless steel worm reducers
EP 700 Series Stainless Steel Worm Gear Speed Reducers | Ever-Power Gear