Taper Adapter

The Taper Mount Direct Thread Adaptor offers a direct thread interface for taper mounted suppressors. Two pieces of wrench flats generate it equally easy to attach or remove from the suppressor or your firearm’s muzzle threads. No proprietary tools essential. Obtainable in 1/2×28 and 5/8×24 with 18x1mm support coming soon. While it is practical to have immediate thread suppressor ability that can move from host to host without the need for further muzzle units, it is important to remember that all host firearm must be examined for baffle alignment via visual inspection before firing.

The 1/2×28 Insert can be utilized with cartriges up to 30 caliber and the 5/8×24 can be utilised up to .338 caliber.

The use of direct thread adaptors increases on direct thread mounted suppressors, by allowing the end user to have modular thread pitches. One Taper Mount Suppressor to Rule Them All.
Black Nitrided
1.5 Ounce Weight
Wrench Flats for each and every contingency
Taper Install Repeatability and Stability
Multi-Thread versatility for your Taper Install Suppressor
taper adapters allow the utilization of holders or equipment with a different machine-side taper then your machine spindle taper, such as using a BT40 tapping chuck on a 50-taper spindle.

These adapters eliminate lead period losses in the event of a machine breakdown. Adapters can also help in testing custom equipment on another machine compared to the planned production machine.

Taper adapters avoid the need for a supply of new holders or tools for a specific machine. They arrive prepared to use with built-in locked clamping mechanisms featuring a clamping screw on a ball bearing for steep taper clamping or HSK locking unit for taper clamping.
The steep taper is the standardised form of an instrument taper for clamping tools in the key spindle of a machine tool
The steep taper is standardised in DIN 69871 part 1
No self-locking (in contrast with the Morse taper), thereby making tool adjustments easier without clamping. That is particularly significant for automated tool changes
Little clamping travel equals short clamping time
High torsional rigidity due to the short distance between your leading edge and spindle bearing (brief overall length)
For adapting morse taper equipment to milling equipment that take R8 tools
Alloy metal hardened to 50-52 rc
Critical surfaces precision ground
Use in R8 Taper Adapter Machines
Turning Equipment More taper reducing sleeve is employed to convert your headstock out of #2 MT to #1 MT. This is useful assuming you have a travel centre or pen mandrel which is usually 1MT as well as your headstock is 2MT


Recent Posts