We – EPG Group the bigge EPT Chain and agricultural gearbox factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
| Rope Size | C | D | E | G | N | WT (lbs) |
| 3/16″ – 1/4″ | 0.40 | 0.94 | 0.38 | 1.41 | 1.44 | 0.23 |
| 5/16″ | 0.47 | 1.06 | 0.38 | 1.50 | 1.54 | 0.28 |
| 3/8″ | 0.51 | 1.06 | 0.44 | 1.84 | 1.78 | 0.40 |
| 1/2″ | 0.59 | 1.25 | 0.50 | 2.21 | 2.15 | 0.62 |
| 5/8″ | 0.72 | 1.50 | 0.63 | 2.72 | 2.57 | 1.03 |
| 3/4″ | 0.86 | 1.81 | 0.75 | 2.94 | 2.67 | 1.75 |
| 7/8″ | 0.97 | 2.12 | 0.75 | 3.31 | 2.86 | 2.25 |
| 1″ | 1.13 | 2.25 | 0.75 | 3.72 | 3.06 | 3.00 |
3/16 inch – 1 inch Diameter
Wire rope clips are fittings used to make an eye or join two cable or wire rope ends together. They are a simple fitting that can be installed in the shop or in the field. There are three basic types of steel wire rope clips – Drop forged, malleable iron and fi EPT grip types. The intended application for the wire rope or cable should determine which type to use.
For important or critical applications and if to be used in overhead lifting or suspending, always use standard drop forged type and drop forged fi EPT grip type clips. Never use a malleable iron type clip for these applications.
The components of wire rope clips are the saddle, the bolt(s) and the nuts.
Forging is the practice of heating a piece of steel and hammering it to shape. Doing this gives the steel linear grain structure and greater strength. In the drop forged clips, the saddles are the parts that are drop forged. The saddles of malleable iron clips are made from a grade of steel with poorer strength qualities and is ca EPT into shape and therefore, has a granular microstructure and not linear. This means the ca EPT malleable saddle can yield under greater loads and cause the wire rope or cable to slip through and potentially fail. In general, forging is stronger than a casting.
For clips to work properly and gain their design efficiency (see charts), both the minimum number of clips required and the nuts mu EPT be torqued to the prescribed foot/pound rating.
In drop forged and fi EPT grip type clips, the saddle pieces are hot dip galvanized and the bolts and nuts are electro-galvanized (zinc plated). With malleable clips, the saddles, u-bolts and nuts are electro-galvanized.
All three types of clips that E-Rigging sel EPT conform to U.S. Federal Specification FF-C-450. It should be noted that stainless steel wire rope clips do not conform to this federal specification.
Our Service,” Your Safety, Customers Satisfaction, Our Pursuit “. To provide the mo EPT suitable products and pragmatic services is our firm belief. We can design and manufacture varies of products according to customers requirements. We have been putting the priority to the QUALITY, SINCERITY, EFFICIENCY, and SERVICE.
Sincerely wish long-term cooperation between you and us. Warmly welcome to our company for a visit.
For More information, please visit our website: www.grandlifting.com
Our products include: lever block, push trolley & geared trolley, I beam clamp, lifting clamp, snatch block, webbing sling, endless type webbing sling, round sling, cloverleaf slings, slings bags, grade 80 chain and chain sling, chain fittings, ratchet tie down, ratchet straps, cargo lashing, ratchets, ratchet type load binder, lever load binder, hand winch, hand puller, winch strap, tow straps, logistic strap,winches, rigging hardware, marine hardware, anchors, anchor chains, turnbuckles, shackles, stainless steel rigging, etc.
Please do not hesitate to contact us, if there are any questions or enquiries.
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.
