This standard selection of Servo-Worm Reducers are perfect for use in applications that demand 
powerful, precise positioning and repeatability. These were specifically developed for make use of with state-of-the-art servo engine technology, providing limited integration of the engine to the machine. Angular backlash of less than 1 arc-moments is provided standard.
They can be purchased in four sizes (50 mm to 100 mm center range) with input speeds up to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide range of motor couplings and mounting flanges are available for assembly to virtually all servo motors, and the hollow bore output can be utilized to mount worm drive servo result shafts, pinion shafts, or other drive elements.
Standard applications for these reducers include precision rotary axis drives, traveling gantries & columns, materials handling axis drives, zero-backlash axis drives and digital line shafting. Industries offered include Material Handling, Automation, Aerospace, Machine Tool and Robotics.
helical-worm servo gearmotors possess a torque range of 92 Nm to 520 Nm. As angular drives they are especially space-saving and reduce the expenditure for valuable set up space.
The helical-worm servo gearmotors are designed in such a way that they guarantee you a low-noise system environment. Moreover, these gearmotors provide you exceptional attenuation properties for the procedure of your systems with low degrees of vibration. This can be due to the longitudinal application of force on the input shaft. This allows torque impulses to become prevented successfully and for maximum results when it comes to running smoothness and noise reduction to be achieved.
Both the equipment unit, and the synchronous servomotor are based on our modular system. This allows you to have completely individual configuration options for each application. One issue is for certain – Our servo gearmotors are genuine specialists for very specific requirements.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right angle gearboxes, speed reducers, worm gear reducers and worm drive gearboxes. Gear decrease boxes feature a gear arrangement when a equipment in the type of a screw, also referred to as a worm, meshes with a worm equipment. These gears are usually created from bronze and the worms are steel or stainless steel.
While worm gears are similar to a spur equipment, the worm gearboxes are significantly smaller than other gear reduction boxes. A principal benefit of worm gear reducers is certainly that they produce an output that’s 90° from the insight and can be utilized to transmit higher torque or decrease rotational speed. Most often, a worm gearbox provides right hand threads; to improve the direction of the result, a left-hand thread worm gearbox is required.
At times a motor’s capability may be limited to the main point where it needs gearing. As servo manufacturers develop more powerful motors that can muscle mass applications through more difficult moves and create higher torques and speeds, these motors need gearheads equal to the task.